Skip to product information
1 of 13

Witch Cauldron Fog Machine – Halloween Mist Maker Fogger, 12 Color-Changing LED Water Fountain Prop for DIY Haunted House & Party

Witch Cauldron Fog Machine – Halloween Mist Maker Fogger, 12 Color-Changing LED Water Fountain Prop for DIY Haunted House & Party

Regular price $54.99
Regular price $109.98 Sale price $54.99
Sale Sold out
Shipping calculated at checkout.
Plug Type
Quantity

Witch cauldron mist maker · about 5.5 in wide

A little cauldron that actually brews.

Fill it with plain water, drop the light-up puck in and plug it in. A cool white mist rises from the glowing water and curls over the rim while the colors cycle underneath it.

It is a tabletop prop for a porch step, a party table or a mantel, sized about like a large grapefruit: roughly 5.5 in across and 4.1 in tall. No fog fluid, no heat, nothing to burn.

How it works

Plain water in. Cool mist out.

The puck at the bottom is an ultrasonic mist maker. A small ceramic disc in its center vibrates so fast that it throws the water above it into a fine, cool mist. A ring of 12 LEDs around the disc lights the water from below and cycles through colors, so the mist takes on the glow as it rises.

Because it is only water, the mist is cool to the touch and there is no fluid to buy or smell. Switch it off, tip the water out and it is ready for next year.

Close-up of the 12-LED ultrasonic mist maker puck glowing under the water inside the witch cauldron

Honest sizing

What to expect from it.

Tabletop

A bowl-sized effect

The mist fills the cauldron and drifts a little over the rim. It is not a room-filling fog machine and it will not fog a yard.

Water level

Cover the puck

It works best with the puck under roughly an inch or two of water. Too little and it spits droplets instead of mist; if it splashes, adjust the water and keep it away from anything that should stay dry.

Refill

Top it up as it runs

The only thing it uses is water. Check the level now and then over an evening and add more as it drops. Do not let it run dry.

Where to put it

Porch step, party table, mantel.

  • Front porch. On a step or a side table in a covered, dry spot, next to the pumpkins.
  • Party table. As the centerpiece beside the candy bowl, where guests can look down into it.
  • Mantel or windowsill. Anywhere a plug socket is within reach of the cord.
  • Between seasons. It doubles as a small lit water feature on a desk or shelf.

Keep the plug-in adapter and the cord connector away from the water and out of the rain.

Witch cauldron mist maker glowing purple on a front porch step at dusk beside two carved pumpkins

What arrives

Three parts, one plug socket.

The cauldronBlack plastic with a wire carry handle, about 5.5 in wide and 4.1 in tall
Mist-maker puckCeramic disc ringed by 12 color-cycling LEDs, on a cord with a barrel connector
Power adapterPlug-in wall adapter, 24 V output. Choose your plug type above.

The pumpkins, candy, candles and other props in our photos are not included.

Specifications

The details, plainly.

What it isUltrasonic mist maker with 12 LEDs inside a witch cauldron prop
Cauldron sizeAbout 5.5 in wide x 4.1 in tall (14 x 10.5 cm)
MaterialPlastic cauldron with a wire handle
Lights12 LEDs that cycle through colors automatically
MistCool water mist from plain tap water. No fog fluid, no heat, no smoke.
PowerPlug-in AC adapter, 100-240 V input, 24 V DC output. US, EU or UK plug by variant.
UseIndoors, or a covered dry spot outdoors. Keep the adapter and connector dry.
Not forRain, fog fluid or oils, or running with the puck uncovered

Brew something on the porch this year.

Water, a plug socket and about a minute of setup.

Plain water onlyCool mist, no heatPlug-in power
View full details