Mobile Phone Chest Mount Harness Strap Holder, Head Mount, Chest Mount
Mobile Phone Chest Mount Harness Strap Holder, Head Mount, Chest Mount
Couldn't load pickup availability
Phone Chest Mount Harness
Your phone films it. Your hands do the thing.
Strap the harness on, clip your phone into the clamp, and the camera goes where you go — at chest height, pointing where you point, steady, and completely out of your hands.
It is the cheapest way to turn the phone already in your pocket into a point-of-view camera. No gimbal, no second device, no tripod to reposition every time you move. You choose the chest harness or the head strap at checkout — they are two separate versions of this product, not a set.
What it actually is
An elastic harness and a clamp that grips hard
Two elastic shoulder straps meet at a moulded plate behind your shoulder blades and come down to a wide band that buckles across your ribs. Five sliding adjusters let you pull the whole thing tight to your own body.
On the front, a spring-loaded clamp takes your phone. Rubber pads at the top and bottom of the jaws press against the phone rather than the plastic, so it does not creep. A long thumb screw sets the tilt angle, and the supplied wrench locks it there.
Turn the clamp on its screw and the phone films portrait or landscape. Pop the J-hook and the phone is off you in about a second.
Read this before you open the box
It arrives in pieces, with no instruction sheet
This is the single most common complaint about this mount, on our page and everywhere else it is sold. It is not a fault and nothing is missing — the parts simply come loose in the bag and no printed guide comes with them.
So here is the build. It takes about two minutes and you only ever do it once.
Clamp onto J-hook
Pass a long thumb screw through the back of the phone clamp and into one of the J-hook buckles.
Tighten with the wrench
Use the little metal wrench in the bag, not your fingers. Finger-tight is the reason a clamp droops later.
Hook into the chest plate
Slide the J-hook into the moulded base plate on the chest band. Put the harness on, pull the adjusters, clip the buckle.
Fit
Sized for adults, and it goes over a winter coat
The maker rates the harness as one size for adults from 130 to 250 lb (59 to 113 kg), and states it adjusts over even the largest winter jackets. That is the part most chest rigs get wrong — this one is elastic webbing on ladder adjusters rather than a fixed vest, so it stretches over bulk instead of fighting it.
Worth knowing: worn over a t-shirt at full extension it is a snug fit rather than a loose one. That is by design — a chest mount that hangs loose is a chest mount that wobbles.
Phone fit
A universal clamp, not a phone-specific cradle
The jaws are spring-loaded and open to take the phone you already own, in portrait or landscape. The maker lists it for smartphones with screens of roughly 4 to 7 inches, which covers nearly every current handset including the large Pro and Ultra sizes.
Turn the clamp
Loosen the thumb screw, rotate the phone on its axis, tighten again.
Grip without scratching
Non-slip pads top and bottom press on the phone body, not bare plastic.
Action cameras fit too
The chest plate takes the standard two-prong action-camera fitting, so a compatible camera mount slots straight in.
We do not publish a clamp opening in inches because the maker does not specify one. If your phone lives in a thick rugged or battery case, measure it — the clamp is generous but it is a spring, not a vice.
Straight about the limits
This is a filming mount. It is not action-camera hardware.
A spring clamp holding a phone on a moving body has a job it does well and a job it does badly, and we would rather you knew which is which before you buy.
It is good for: walking and hiking, fishing, filming yourself working or cooking, talking to camera hands-free, recording a ride at an easy pace, and any situation where you want both hands and a point-of-view angle.
The maker specifically says not to film with it while running or jumping, and we are not going to talk you past that. Impact and repeated bounce are what shake the clamp loose and tilt the phone off angle.
It is not water resistant — the maker states this outright. It is not shockproof and it is not rated for climbing, watersports or high-speed riding. If you are doing anything with real force in it, thread the supplied safety lanyard through your phone case loop and onto the harness so that a slip is not a broken screen.
Choosing
Chest harness or head strap?
Both are the same price. Pick the one that matches the angle you actually want — you are choosing one, not receiving both.
What you get
Chest harness version — everything in the bag
Choosing the head strap instead gives you the elastic head mount with the same quick-release clamp and fixings. Materials across both: polycarbonate and ABS plastic with a steel screw, nylon webbing, and silicone pads. Colour: black.
Questions people ask first
Do I get both the chest mount and the head mount?
No. They are two separate versions of this product and you pick one at checkout. The chest harness is the version most people want; the head strap gives a true eye-line angle for close work.
Will it fit my phone in its case?
Almost certainly for a normal slim case. The clamp is spring-loaded and the maker lists it for phones with screens of roughly 4 to 7 inches. We do not quote a clamp opening because the maker does not publish one, so if your case is a thick rugged or battery type, measure the cased width before ordering.
Why did it arrive in pieces?
Because it ships that way, with no printed instructions. Nothing is missing. Follow the three steps above — clamp to J-hook, tighten with the wrench, hook into the chest plate — and it is together in about two minutes.
Can I run with it?
The maker says not to film while running or jumping, so we do not recommend it. Walking, hiking and riding at an easy pace are what it is built for. If you are going to do something bouncier anyway, use the safety lanyard.
Is it waterproof?
No. The maker states it is not water resistant. Rain will not instantly destroy the webbing and plastic, but neither the mount nor your phone is protected by it, so treat it as a dry-weather and light-shower item.
My phone keeps tilting down. What am I doing wrong?
The long screw is finger-tight. Use the small metal wrench that came in the bag to tighten it properly against the J-hook — the maker specifically warns against twisting it by hand. That is the fix in almost every case.
Will an action camera fit it?
Yes. The chest plate uses the standard two-prong action-camera fitting, so a camera on a compatible mount slots into the same base the phone clamp uses.
How tight does it need to be?
Snug. A chest mount worn loose is the only reason one bounces. Pull the adjusters until the band sits flat against your ribs with no slack, then check the clamp is level before you start filming.
Both hands back, camera still rolling.
Pick the chest harness or the head strap, put it on, and film the thing you are doing instead of watching it through a screen.
