Latest Pocket Door Sliding Lock – Invisible Interior Hardware with Smooth Entry Hook, Durable Fittings for Bathroom Privacy and Modern Home Styling
Latest Pocket Door Sliding Lock – Invisible Interior Hardware with Smooth Entry Hook, Durable Fittings for Bathroom Privacy and Modern Home Styling
Couldn't load pickup availability
A sliding door has nothing to hold it shut
That is the whole problem with a pocket door. It runs on rollers, it has no frame to latch into on the swing, and most of them are sold with a finger scoop and nothing else. So the bathroom door drifts open, and there is no way to tell anyone you are in there.
This is the fix, and it is a small one: a latch that sits inside the door. A shallow oval plate goes flush into each face, a slim strip goes flush into the edge, and a short angled tongue swings out of that edge strip into a keeper in the frame. Turn the little disc on the plate and the door stops moving. Turn it back and it slides again.
Nothing sticks out. That matters more here than on a hinged door, because a pocket door has to pass its own hardware into a wall cavity — anything proud of the face will catch.
The part nobody mentions: it also gives you something to pull
Look at the edge strip and there are two things on it, not one. Above is the latch tongue. Below is a small flat tab that folds outward — a finger pull, hinged so it drops back flush when you let go.
If you have ever tried to close a pocket door from the inside once it is nearly home, you know why that is there. There is no handle left to grab. The fold-out tab gives you one, and then hides again.
Be clear about what this is
It is a privacy latch, not a security lock. It tells the rest of the house the room is occupied and it stops the door being slid open casually from the other side. It is not built to resist someone determined, it carries no security rating we can point to, and it has no business on an external door or anywhere valuable is kept.
It is not a child-safety device. Nobody has rated it as one and we are not going to imply otherwise. Do not fit it anywhere a small child being shut in — a bathroom, a basement, a utility room — would be a problem.
There is no key. Both faces carry a round disc with a single straight slot across it: the sort of turn you can also catch with a coin or a flat screwdriver. Test from the outside yourself once it is fitted, and satisfy yourself it does what you need, before you rely on it for a door behind which anyone might need help.
Fitting it means cutting the door
This is the honest headline and it is the reason most returns in this category happen. It is not adhesive and it is not surface-mounted. Fitting it means three cuts: a pocket routed or chiselled into the door edge for the lock case, a shallow recess in each face for the oval plates, and a matching recess in the frame for the keeper.
Done properly it takes an afternoon with a router or a sharp chisel and a drill. Done badly it is very hard to undo — you are cutting into a door leaf, and a slot in the wrong place stays there. If you are not confident, a joiner will fit it quickly, and that is money well spent on a door you use every day.
The screws sit behind the face plates rather than through them, so once it is in, there is nothing on show.
Will it fit your door? Measure these four
These figures are the manufacturer's published dimensions for this hardware, not a measurement we have taken ourselves. Measure your own door and your own frame before you cut anything.
What arrives
One complete lock set for one door, in the finish you choose: an oval face plate for each side of the door, the lock case with its edge strip carrying the latch tongue and the fold-out finger pull, and a keeper for the frame.
We do not have a packing list from the supplier, so we are not going to promise you a particular set of screws, a fitting template or printed instructions. Assume you may need to supply your own fixings and work from your own measurements. If that matters to you, ask us before you order and we will check.
Where it earns its place
Bathrooms and en-suites on a sliding door, which is the case that makes a latch non-negotiable. Bedrooms and dressing rooms where a pocket door is the only thing between two spaces. A home office that needs one closed hour. And barn-style or cavity sliders that came with a finger scoop and nothing to hold them.
Questions worth asking before you order
Can I fit this without cutting the door?
No. It is a mortise lock — the case lives inside the door edge. If you need something that does not cut into the leaf, you want a surface-mounted sliding bolt instead, and you should buy that rather than this.
Does it come with keys?
No. There is no key cylinder in this lock. It turns with the disc on the face.
Can it be opened from the other side in an emergency?
The disc turn on the outer face has a straight slot in it, which is the standard coin-or-screwdriver arrangement. We cannot show you a manufacturer's document confirming it is intended as an emergency release, so please do not buy it as one. Fit it, try it from the outside with a coin, and decide for yourself before you use it on a door where being locked in would matter.
Will it fit a hollow-core door?
Only if the door has a solid timber block in the edge deep enough to take a pocket the depth given above. Many hollow-core doors have a narrow edge rail and nothing behind it. Check before you order — this is the most common reason a lock like this cannot be fitted.
Which finish should I pick?
Match the door furniture already in the room rather than the door itself. Matt black sits with modern and industrial fittings, gray is the most neutral of the four, gold is a cooler yellow and red gold is warmer and pinker. On a recessed fitting the finish should read as part of the door, not as an accessory on it.
Will it stop the door rattling?
Latched, yes — the tongue is engaged in the keeper and the door is held. Unlatched it does nothing to the rollers, so a door that rattles while it is open will still rattle.
