Corn Sheller Drill Attachment – Corn Stripper & Kernel Remover for Dried Corn

Name: Corn Sheller Drill Attachment – Corn Stripper & Kernel Remover for Dried Corn
Brand: chigous
SKU: 930125SEH1
Price: 24.99 USD
Availability: InStock

$24.99

~~$49.99~~ $24.99

Sale Sold out

Shipping calculated at checkout.

Corn sheller drill attachment

Shell dried corn with the drill you already own.

This is a corn sheller head for a power drill. Clamp its steel shank in your drill's chuck, push a dried ear of corn into the open end, and the spinning steel teeth strip the kernels off the cob into your bucket.

It is made for corn that has dried hard on the cob: feed corn for chickens and livestock, popcorn, and seed corn you are saving for next season. It has no motor and no plug of its own; your corded or cordless drill does the work.

How it works

Chuck it, set it, feed it.

Tighten the steel shank in your drill chuck like a drill bit. Set the teeth to suit your ears, run the drill, and push a dried ear into the open end, holding it by the far end. The kernels fall away and the bare cob comes back out.

Start at a low speed and let the teeth do the work rather than forcing the ear in.

Gloved hands feeding a dried ear of corn into the black corn sheller mounted on a cordless drill, kernels falling into a steel bucket

Adjustable teeth

Set it for fat ears or slim ones.

The teeth are steel bolts that pass through the wall of the sheller and point inward, with nuts on the outside. Loosen a nut, move its bolt in or out so the tips just meet the kernels on your ears, and tighten it again.

Move them in for slim ears such as popcorn, and out for thick ears of field corn. A small wrench makes the job quick.

Looking into the open end of the corn sheller at the adjustable steel bolt teeth that strip the kernels

What arrives

One corn sheller head.

Corn sheller headBlack plastic body, steel drill shank and adjustable steel bolt teeth

Not included: the drill. The drill, gloves, bucket and corn in our photos are there to show the sheller in use.

Specifications

The details, plainly.

What it isCorn sheller (corn stripper) head that attaches to a power drill

Made forDried corn on the cob: feed corn, field corn, popcorn and seed corn

PowerNone of its own; driven by your corded or cordless drill

FitsDrills with a standard keyed or keyless chuck

TeethSteel bolts, adjustable in and out for different ear sizes

BodyBlack plastic with a steel shank

SizeAbout 6 in (15 cm) long; small enough to hold in one hand

In the box1 corn sheller head

You also needA drill; a small wrench for adjusting the teeth; work gloves

Worth knowing before you buy

The honest small print.

It is for dried corn. The kernels need to be dry and hard on the cob. For fresh sweet corn you are cooking tonight, a knife-style kernel cutter is the better tool.
The drill is not included. You get the sheller head only; it runs on a drill you already have.
It is a home and small-farm tool. It shells one ear at a time, which suits a few buckets of feed or a season's seed and popcorn, not a commercial harvest.
Mind your hands. Wear work gloves, hold each ear by its far end, keep fingers out of the open end while the drill is running, and unplug or remove the battery before adjusting the teeth.